Plate & Bar Storage for the Titan TITAN Series Power Rack
7 options that fit the TITAN Series Power Rack’s 3×3" uprights and 1" holes. Confirmed ones are listed first.
Bells of Steel Bolt-On Plate Pegs (Manticore)Fits per specs3x3" uprights, 1" pin in 1" holes.
5" or 13". Two-bolt mount; Bells of Steel doesn't publish the bolt spacing.
Bells of Steel Change Plate Storage Pegs (Manticore)Fits per specs3x3" uprights, 1" pin in 1" holes.
Two-bolt mount, 8" sleeves. The Manticore version adds UHMW upright protection.
Bells of Steel Pin Plate Pegs (Manticore)Fits per specs3x3" uprights, 1" pin in 1" holes.
Drop-in pegs, 12.5" loadable.
Rogue SP33100 Plate Storage Pair (Long) for MonsterFits per specs3x3" uprights, 1" pin in 1" holes.
Rogue: Monster series only; not Monster Lite or Infinity. Two 1" bolts.
Bells of Steel Vertical Mount Barbell Holder (Manticore)Fits per specs3x3" uprights, 1" pin in 1" holes.
Two-bolt mount. Needs about 9 ft of ceiling for a standard bar.
REP Weight Horns (5000 Series)Fits per specs3x3" uprights, 1" pin in 1" holes.
Mounts like a J-cup. Pin size from REP's 5000 series spec.
Synergee Weight Plate Storage PegFits per specs3x3" uprights, 1" pin in 1" holes (ships with 5/8" and 1" pins).
Held in by its own weight, no pins. Sold in 2x2, 2x3 and 3x3 versions with a converter for 5/8" or 1" holes: order the one for your uprights.